Level Transmitters
Related Subcategories
Level Transmitter Solutions
Level transmitters are industrial measuring devices that continuously measure the level of liquid, solid, and granular materials in tanks, silos, storage tanks, or process equipment, and transmit this information as analog or digital signals to PLC, DCS, SCADA, or automation systems. They are indispensable equipment for process safety and efficiency in chemical, food, pharmaceutical, energy, water treatment, petrochemical, mining, and manufacturing plants.
At Aktif Instrument, we offer a wide range of products to suit different process needs. Our product range includes:
- Radar Level Transmitters
- Ultrasonic Level Transmitters
- Hydrostatic Level Transmitters
- Capacitive Level Transmitters
- Magnetic Level Transmitters
- Non-contact Level Measurement Systems
- Continuous Level Measurement Devices
It is located.
Where are level transmitters used?
Level transmitters provide reliable level control in many different industries.
- Chemical and petrochemical plants
- Water and wastewater treatment systems
- Food and beverage production facilities
- Pharmaceutical manufacturing processes
- Cement factories
- Mining facilities
- power plants
- Fuel and petroleum depots
- Boiler and steam systems
- Tanks, silos and process lines
Connection: R1 1/4”...R2" - Material: Stainless Steel - Output: 4-20mA - Temperature: Max. 60°C - Pressure: Max. 10 bar
Connection: R1 1/2”...R2" - Material: Stainless Steel - Temperature: Max. 125°C - Pressure: Max. 30 bar
Measurement range: 1m...250m - Output: 4-20mA/0-10V/RS-485 - Accuracy: 0.5%, 0.25% - Material: Stainless Steel - Protection class: IP68
Measurement range: 1m...200m - Output: 4-20mA/0-10V/RS-485 - Accuracy: 1% - Material: PTFE - Protection class: IP68
Measurement range: 5m...100m - Output: 4-20mA - Accuracy: 0.5% - Material: Stainless Steel - Protection class: IP68
Connection: Threaded - Output: 4-20mA / 0-10V - Supply: 9-36VDC - Accuracy: 1% - Probe: PTFE - Protection: IP67
Connection: Threaded - Output: 4-20mA / 0-10V - Supply: 9-36VDC - Accuracy: 1% - Probe: SS304 - Protection: IP67
Connection: Threaded - Output: 4-20mA + 2PNP - Supply: 16-30VDC - Accuracy: 0.5% - Probe: PTFE - Protection: IP67
An ultrasonic level transmitter is a microprocessor-controlled digital level meter. In measurement, ultrasonic pulses produced by a emitting sensor (transducer) are reflected by the fluid receiving the same sensor or an ultrasonic receiver, resulting in a surface acoustic wave which is then converted into an electrical signal by a piezoelectric crystal or a magnetostrictive device. This is done by transmitting and receiving sound waves to calculate the time between the sensor surface and the measured distance.
Ultrasonic level transmitters are a non-contact measurement method for solid and liquid tanks and are often preferred for corrosive fluids and long tank lengths.
Ultrasonic level transmitters are highly reliable, cost-effective, and easy-to-install and maintain liquid level/material level measuring devices. They can meet most liquid level/level measurement requirements without contact with the measured medium.
Application: Liquid - Measurement: 35m - Temperature: -40°C...+80°C - Accuracy: 2mm - Frequency: 76-81GHz
Application: Solid - Measurement: 35m - Temperature: -40°C...+80°C - Accuracy: 2mm - Frequency: 76-81GHz
Application: Liquid - Measurement: 50m - Temperature: -40°C...+200°C - Frequency: 80-140GHz - Ex ia IIC T6/T2 Ga - ATEX, IECEX, PAC
Application: Solid State - Measurement: 125m - Temperature: -40°C...+200°C - Frequency: 80-140GHz - Ex ia IIC T6/T2 Ga - ATEX, IECEX, PAC
Application: Liquid - Measurement: 30m - Temperature: -40°C...+80°C - Frequency: 76-81Hz - Ex ia IIC T6/T2 Ga - ATEX, IECEX, PAC
Float level sensors are designed to detect liquid levels by utilizing the principle of buoyancy. A magnetic field from a movable float within a guide rod activates or deactivates a reed contact located inside the guide rod. They are manufactured as continuous level or point level sensors depending on the intended use. Continuous level sensors are available in resistance (ohm), mA, and V units.